Limited Time Offer!
Selling Price -
Selling Price -
2023 John Deere M Series Z920M 54 in
- 7-Iron™ PRO Mowing Deck
- Gasoline Engine
Features may include:
Powerful 23.5-hp (17.5-kW) commercial-grade engine delivers class-leading performance and efficiency- The Z920M is powered by an air-cooled, vertical shaft engine:
- 23.5-hp (17.5-kW) gas engine
- Overhead valve design
- More horsepower and torque per cubic inch of displacement
- Better fuel efficiency
- Full-pressure lubrication with full-flow filter
- Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
- Oil filter helps keep oil clean for increased engine life
- V-twin big block design
- Vertical shaft
- Easy-access, dual-element air filter with quick release latch
- 20-amp alternator
- Fuel pump
- Aluminum block engines
- Effectively dissipate heat
- Lightweight and strong construction
- Extend engine life due to elimination of debilitating engine temperatures
- Air-cooled engine design
- AIR CLEANER FILTERS OUT DUST THAT CAN DAMAGE AN ENGINE
- ZTrak™ Z900 Mowers are equipped with a dual-element, canister-style air filter, easily accessible from the rear of the machine without tools.
- The filtration system pulls clean air from above the engine, in turn filtering out the dust that can damage an engine over time.
- Filters are extremely easy to change when required.
- Pre-cleaner provides more protection against contamination in dusty and dirty applications.
- The ZTrak Z900 Mowers are equipped with one single-fill, top-draw fuel tank:
- 11.5-U.S. gal. (43.5-L) capacity enables operators to mow all day without refueling.
- The fuel gauge makes it quick and easy to see how much fuel is in the tank.
- Top draw provides added safety.
- A large fuel-filler neck is angled to make it easy for an operator to complete the fueling process.
- Under normal conditions, load, and operation, fuel consumption for the Z900 ZTrak Mowers is 1.5 U.S. gph (5.7 L/hr) to 2.2 U.S. gph (8.3 L/hr), depending on the horsepower and conditions.
- 7-Iron PRO mower decks have demonstrated quality, performance, and durability. They deliver a high-quality cut in diverse conditions.
- Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
- Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
- Extra reliability and long life with cast-iron blade spindle housings.
- Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
- A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
- The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
- Quick-release belt covers do not require tools or the removal of a ring clip; just lift one corner of the cover and rotate it slightly to remove.
- 2023
- John Deere
- M Series
- Z920M 54 in
- Zero-Turn Mower
- Model: FX730V
- Gross at 3,600 rpm: 23.5 hp (17.5 kW)
- 44.3 cu in. (726 cc)
- Two
- Full flow, replaceable
- Full pressure
- Air
- Pre-cleaner
- Electro-magnetic, 200 lb-ft (271 Nm) | Drive: V-belt
- Consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
- Gasoline
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
- Hydrostatic
- Dynamic braking: Twin levers
- Internal wet disk integrated in the transmission | actuation: Hand brake
- Drive: 24x12-12 | Caster wheel type: Flat free | Caster wheels: 13x6.5-6
- Load rating: 4 PR
- 12 V
- Cold cranking amp: 300 amp
- 20 amp
- Speed range 0-10 mph (0-16.1 km/h) / Forward 0-10 mph (0-16.1 km/h) / Reverse 0-4.5 mph (0-7.2 km/h) | Blade tip speed: Approximately 18,000 fpm
- 7 gauge / 0.180 in. (4.6 mm)
- Mower decks: 54 in. (137 cm) | blade thickness: 0.25 in. (0.64 cm)
- Of-cut range: Increments 0.25 in. (0.64 cm) / 1-5.5 in. (2.54-14 cm) | With ROPS up, 73 in. (185 cm) / With ROPS down: 47 in. (119 cm)
- 54 in. (137 cm)
- 84 in. (213 cm)
- With chute down: 68 in (173 cm)
- 11.5 U.S. gal. (43.5 L)
- Crankcase With filter, 2 U.S. qt (1.9 L)
- 5.9 U.S. qt (5.6 L)
- 1,220 to 1,283 lb (553 to 582 kg)
- Speed and direction control : Twin levers | Filter: Internal, replaceable | Blades number: 3 | Front anti-scalp rollers: RH, center, LH
- 7-Iron PRO, one-piece stamped steel with reinforcements
- Side
- 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation
- 1TC920MVVPR130136
- 54
- Winter Park, Florida
- New
- E006917
- 2023
- John Deere
- M Series Z920M 54 in
- green
- Model: FX730V
- 23.5
- 0.2
- Hydrostatic
- Gas
- Available
- With chute down: 68 in (173 cm)
- Of-cut range: Increments 0.25 in. (0.64 cm) / 1-5.5 in. (2.54-14 cm) | With ROPS up, 73 in. (185 cm) / With ROPS down: 47 in. (119 cm)
- 1TC920MVVPR130136
- 54