2023 John Deere 2 Series 2038R

Financing available, checks, cash and all major credit cards accepted. All trade-ins considered. Shipping available, no problem! Call (407)671-4439 for more information!
MoreLess

Selling Price -Request a Quote

2023 John Deere 2 Series 2038R

  • Comfortable, marine-grade seat stays in top condition
  • Larger, heavier frame for added stability
  • Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes

Features may include:

Powerful, high-torque diesel engine delivers superb efficiency
  • The 1.642-L (100.2-cu in.) displacement, liquid-cooled 3TNV88C-NJT Yanmar® diesel engine provides 22.9 kW ( 30.7 hp) to the 2032R.
  • The 1.568-L (95.8-cu in.) displacement, turbocharged liquid-cooled 3TNV86T-NJT Yanmar diesel engine provides 27.4 kW ( 36.7 hp) to the 2038R.
  • The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.
  • The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and a lower cost of operation.
  • The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.
  • The engine comes with an aftertreatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).
  • After many hours of use, the exhaust filter may require an ash removal service.
  • PARKED FILTER CLEANING
  • In some instances where passive and active filter cleaning have not fully cleaned the particulate matter from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.
  • The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.
  • The emissions system on this engine constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.
  • Yanmar TNV Series engine offers these features:
  • Economical cast-in-block cylinder design for good cooling and long life
  • Direct fuel injection
  • 2023
  • John Deere
  • 2 Series
  • 2038R
  • Compact
  • Model: 3TNV88C-NJT
  • Yanmar®
  • SAE J1995 rated power: 36.7 hp (27.4 kW) / 37.2 PS at 2500 rpm
  • 2500 rpm
  • Turbocharged
  • Final Tier 4
  • Three | Cast-in-block
  • 95.8 cu in. (1.568 L)
  • 3.39 in (86 mm)
  • 3.54 in. (90 mm)
  • Pressurized
  • Water pump
  • Dual element
  • At rated speed: 77.2 lb-ft (104.7 Nm)
  • Power take-off (PTO) power: 30.4 hp (22.7 kW) | Rear - 543 rpm / Mid - 1998 rpm
  • Direct Injection
  • Diesel
  • 19.1:1
  • Direct Injection
  • Hydrostatic transmission (HST)
  • Spur gear
  • Power steering
  • Wet disc
  • Wet disc
  • R1 Ag 7.00-12 / R3 Turf 23x8.50-14 / R4 Industrial 23x8.50-14 / R3 Turf Radial 200/60 R15
  • R1 Ag 12.4-16 / R3 Turf 14-17.5 / R4 Industrial 14-17.5 / R3 Turf Radial 300/70 R20
  • 500 CCA
  • 85 amp
  • Starter size: 1.9 hp (1.4 kW)
  • Remote control valves available: Up to three | Open center
  • Steering: 4 gpm (15 L/min) | Implement: 5.3 gpm (20.2 L/min) / 9.3 gpm (35.2 L/min)
  • 2495 psi (172 bar)
  • Dual gear
  • Category 1
  • 67.8 in. (1723 mm)
  • Without brakes: 8.07 ft (2.46 m)
  • 8.5 gal. (32 L)
  • 1940 lb (880 kg)
  • 3968 lb (1800 kg)
  • 24-in. behind link arms: 1356 lb (615 kg)
  • Platform - flat/straddle: Semi-flat | Gear shift location - console/floor: Left-hand side
  • Open station: 2910 lb (1320 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Winter Park, Florida
  • New
  • 2023
  • John Deere
  • 2 Series 2038R
  • 32 L 8.5 U.S. Gal.
  • 38
  • Hydrostatic transmission (HST)
  • Diesel
  • Available
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.